Stainless kitchen sink from the category of solid and expensive designs has long been moved to affordable equipment. The installation of a sink now is not difficult, especially since the manufacturers of sanitary equipment took care of this. The installation of a branch valve with a valve or a basket valve is available for hand-made execution. It remains only to buy a new sink.
Content
Stainless steel sink
For several decades, the world's leader in kitchen equipment is stainless steel sink.
The urgency and demand for consumers this type of kitchen equipment has won and continues to win:
- good technical characteristics
- multivariance of the model range
- stylish design.
Modern types of stainless steel washers 2016 are the best models of the manufacturers of Germany, Switzerland, Italy and Finland, the brands Blanco, Franke, Kohler, Reginox, Plados. Undoubtedly, manufacturers use high-quality stainless chromium-nickel steel of Premium class for the production of stainless steel kitchen sinks.
Due to the quality of the metal, the DECOR (Leinen) steel and the Microdecor (Microleinen) steel, stamped or welded sink provides an attractive appearance, protection from corrosion and mechanical damage. In addition, the design of the models successfully updates the interior with a round sink for the kitchen in stainless steel or a corner mortise model.
We will not be mistaken if we say that the advantage of polished or matt stainless steel sinks in their practicality and versatility. This equipment of the kitchen space looks organically in any style solution. So, let there always be a stainless sink!
Types of installation of sinks
Depending on the type of washing, the following types of installation are distinguished:
- overhead
- mortise mounting in the countertop
- in the general level with a table top.
The installation of the sink is divided into several stages: preparation of the installation site and connection to the drain. The complexity of the installation consists in the correct selection of the depth of the bowl, its fixing, the selection of the height of the mixer and the installation of a siphon under the sink.
Install a stainless sink
consignment sink
The most accessible is the installation of an ancient overhead sink, supplied and manufactured with a substage. Recall that the substitute is a cabinet in the form of a special box without an upper partition. The design is old-fashioned, but, nevertheless, due to our mentality, it is still in demand.
The washing installation process consists of the steps:
- assembling or creating a podstolya (curbstone)
- fixing the mounting of the washing bowl
- mounting the outlet and siphon under the sink
- installation of the wash bowl.
A difficult part of installing a surface wash is placing the gasket under the drainage shelf and the lock.
mortise washer in the countertop
The mortise installation is in principle no different from the overhead type. You'll have to podsuetitsya when creating a landing hole and ensure the sealing of the bowl sink. The technology of installing a sink in the countertop when the mortise is installed is identical to the overhead structure.
Step-by-step instruction washer installation
- preparation of the table top according to the washing pattern
- drilling holes for mixer tubes
- installing the wash bowl in the prepared hole
- sealing the joints of table tops and sinks
- installation of a kitchen faucet and siphon.
Mortise sinks for countertops are considered a modern type of equipment equipped with a tap-off valve - a basket valve (3.5 "valve) and overflow.
How to install a mortise and connect the mixer, shown in the video.
a sink with a countertop in the general level
Particular attention is paid to sinks installed in the general level with a built-in countertop, including stainless steel corner sinks for the kitchen. Such integrated models of sinks can be confidently called an independent kitchen design tool.
In addition to the elegant bowl model, besides the elegant model of the bowl, there is an additional small bowl equipped with a co-mandator, a tap-off valve with automatic valve, a waste shredder, a standard basket valve and a siphon with the possibility of self-connection to a dishwasher or washing machine.
An indispensable condition is taking into account the width of the wall edge for installing a sink near the wall or kitchen furniture.
That's where you have to work with the installation!
flap valve installation
The basket valve is a metal fittings installed on the bottom of the sink to hold the waste. The valve consists of a drain part and a movable basket. The diameter of the upper part of the valve and the height are selected in accordance with the depth of the hole in the bottom of the sink.
The valve is simply installed in the bottom hole. The valve is sealed by a rubberized gasket. The upper part - the waste collection basket is easily removed for cleaning.
we collect branch valves
Step-by-step instruction:
From the plum we remove the decorative cover. The plastic part of the valve is installed under the wash bowl. The steel part of the armature is twisted. Seal the rubber band in the groove on the tube.
The threaded steel plate is installed in the sink in the inner part. The plastic part is installed from the outside. Then we tighten both parts of the reinforcement.
Then attach the fitting of the siphon. On the sink put on the nut plastic and rubber gasket and tightly connect the tube. We fix with a nut. To the second side of the tube of the branch armature we attach the knee.
To avoid errors when installing the elements of the sink, check out the suggested video.
installation of a sink with a double siphon
The initial stage of the washing installation is the installation of the mixer.
Installation of a sink with a double siphon does not differ from the traditional installation, however there are some features.
A special feature of the installation is the installation of additional structural elements.
This is the connection of two pipes coming from one and the other sinks. Pins and special fixing screws are required for the connection. Standard nozzles are connected in the traditional way. In addition, an overflow structure is installed and the tap hose is connected to the openings of the overflow device.
Then connect the branch pipe of one drain to the branch pipe of the other.
On the joint pipe a settler is installed. The final stage of installation of a sink with a double siphon is the connection of the outlet pipe to the sewage system of discharge of waste water.
When organizing the plum, use special clamps.
After connecting all the elements of the system, control water is started to detect possible leaks.
Loading ...