The ever-changing design of plastic windows gives more and more new models. However, any stylish design can only become an empty sound if the daily functionality of the window hardware is not assured.
Content
When it is necessary to care for window fittings
To your life is not overshadowed by the trouble associated with the malfunctioning of the windows, give the accessories special attention. Care for the accessories of windows will consist in cleaning and lubrication of individual elements and components of window hardware. How to prevent the functionality and functionality of the window hardware?
The main acting, and if to say more precisely, the functional face of the window system is the window fittings. Due to the combined operation of the window leaf fittings, the necessary functions are carried out. Therefore, in order for the window system to continue to serve for a long time, it is necessary to correctly adjust and carry out systematic care of the fittings.
When is it necessary to care for the fittings? The correct answer is: "Regularly", because when the hardware breaks, even though it is iron, it will be too late.
Adjustment of accessories for plastic windows
hardware status check parameters
The state of the window hardware and its operation must be checked against the following parameters:
• secure fastening of hardware components and accessories
• process and results of wear of components and parts
• ease of the window leaf.
Undoubtedly, its safe working capacity depends on reliable fastening of the fittings. Therefore, it is recommended to check the fit of the individual fixing screws in the system. If a loosening of the fastening ties is found, the screw is recommended to tighten.
However, over time, the wear process of the elements and parts of the window system takes place. To avoid premature wear of window fittings, it is necessary to clean and lubricate the most critical parts.
The ease of the window leaf can be achieved by applying basic adjustment techniques.
In addition, the adjustment of window strapping fittings includes:
• elimination of sagging, blowing of the sash or balcony door
• adjustment of free clamping and stroke
• Transfer of the window system from the "winter" to "summer" mode
• partial replacement of accessories for plastic windows
• preventive cleaning and lubrication of fittings.
The adjustment of PVC windows with their own hands does not take much time. At work it is necessary to know exactly the location of the main adjustment and adjustment nodes. Adjustment is carried out with the use of special tools and devices that solve the problem of how to adjust the accessories of the plastic window.
To adjust the closing of the window leaf, the projecting part of the eccentric is turned towards the inner surface of the window system, and to loosen in the opposite direction.
How to make adjustments to the hardware yourself will help you with the video.
Tools for adjusting
For the proposed work on the adjustment, systematic cleaning and lubrication of PVC window fittings, the following tools are required:
• 4 mm Allen key
• Phillips screwdriver size 3
• a set of replaceable tips for a screwdriver (cross-section "star", marking T)
• pliers
• aerosol for lubrication WD-40.
Hexagonal key, called in everyday furniture, standard form and size is the main regulating tool. Adjustment of the fittings is carried out by reference points. Recall that the basic points are:
• Adjustment of the window leaf vertically
• Adjustment of the window sash horizontally
• Adjustment of the leaf clamp
• adjustment of the lower horizontal corner of the leaf.
It is with the use of the hex key you can make adjustments at all base points.
Scrolling the adjusting screw clockwise or counterclockwise, the window leaf will move to the right or left, respectively. With any change in the position of the window leaf after a half-turn or a complete revolution of the adjusting tool, it is recommended to monitor and check the operability of the window system. To achieve a positive result, the adjustment procedure is repeated.
Adjustment of fastening elements
Fastening of window strapping accessories from the manufacturer is made with the help of bolts with a hat for a cross-head screwdriver. Therefore, using a hexagonal wrench and a Phillips screwdriver, you can loosen the mount:
• adjusting bolts on the "scissors" system
• Adjustment bolts on the lower shed
• adjustment bolts on the upper canopy
• Magnetic balcony latch
• clamping mechanism
• adjustment of trunnions
• pens.
Depending on the brand of the manufacturer of plastic windows, the fittings and the algorithm for its adjustment are not fundamentally different. If you want, you can refer to the "primary sources" - detailed descriptions and technical instructions of the main manufacturers of window fittings Roto, Rehau, Maco, Veka.
We make cleaning and lubrication of window fittings
In the daily operation of window systems, a significant amount of street dust and dirt accumulates on the fittings and seals, which contributes to the wear of moving parts. With regular cleaning, special attention should be paid to the folding mechanism. To clean the "scissors" it is recommended to use a brush with a stiff bristle on the long handle. Remove dust and dirt in the main components of the elements, and then wipe with a damp sponge.
For the lubrication of window fittings, it is recommended to use special oils and aerosols with a long nozzle, such as a WD-40z lubricant spray. Aerosol packages with lubrication are equipped with easy-to-use tips that allow unobstructed entry into hard-to-reach places. Lubrication is applied by several drops, preferably on both sides of the assembly or the element of the strapping fittings.
It is not recommended to use lubricants that contain acidic, aggressive or resinous substances. It is recommended to lubricate the main functional components of the window system, including silicone seals. By lubricating window fittings and seals, it is possible to completely eliminate or eliminate the possibility of drafts.
Loading ...