A simple and affordable, at first glance, work on laying ceramic tiles hides a lot of special techniques. Thanks to the helpful advice, which the tile experts kindly share, there is an excellent opportunity to make the installation yourself. Do not forget that when you choose building materials, the selection of tiles must be given a certain time. Buy quality tiles can only be in specialized stores of building materials. So, read and learn useful tips!
Content
Ceramic tiles or Absolut Keramika
Historically, the most practical and affordable option for facing the bathroom, kitchen and toilet is ceramic tiles.
Perhaps that is why the staggering number of collections, colors and patterns of ceramic tiles for the bathroom excites the imagination of numerous buyers. How to choose and most importantly properly tile the bathroom with your skillful hands?
Currently, there are certain rules for laying tiles in the bathroom, which must be remembered. Achieve stunning success and dramatically update the interior of the bathroom will help ceramic tiles.
The increased interest in the ceramic tile can be explained by the following reasons:
• a variety of sizes of wall and floor tiles
• original ready-made collections
• Availability and many options for laying tiles yourself.
When choosing a tile, you need to clarify the dimensions of the bathroom and make a simple calculation of the bathroom tiles. Naturally, based on the geometric dimensions of the room, it is required to select the tiles in size.
Helpful Tips
For a small bathroom it is not recommended to use a large tile (600x1200, 300x600). The monumentality of large tiles will look in large and spacious bathrooms.
For miniature bathrooms, the most suitable are the dimensions of the tiles (200x300, 250x450). It will be a special mirror tile, which can visually expand and enlarge the space. The secrets of the layout of ceramic tiles before laying are presented here.
Choice of ceramic tiles
Undoubted is the fact that the finished collections of ceramic tiles in the bathroom solve a lot of issues related to the choice of material and color solution. Tile manufacturers have taken care of the problems of customers, and always offer original solutions when selecting the facing material.
Design tiles in the bathroom from the manufacturers is aesthetic appearance, versatility and accessibility, an example can serve as a ceramic tile for bathroom ceramics marazzi. Collections Kerama Marazzi contain decorative elements (borders, inserts, decors), using which you can refresh the surface of the walls of the bathroom with patterns and ornaments.
Elements of decor are made on the basis of the style of the ceramic tile.
Therefore, the question: "How to put the tile in the bathroom" will be resolved quickly.
Helpful Tips
Why choose a tile preference is better to give ready collections? It's simple: as a rule, not one collection but several are presented for your review. Collections are divided into subspecies, made in one conditional style: Japanese, Roman, Scandinavian.
Agree that it is always possible to choose from a rich assortment, moreover, that professional design is created by professional designers. Trust their taste and sense of color.
How to choose a ceramic tile will help you this instructive video.
We are laying tiles
To lay the tile in the bathroom with your own hands, you need to remember the following rules.
draw a drawing of the tile arrangement
Before starting the planned work, make a drawing on a piece of paper in a box. In the drawing, draw, keeping the proportions, the total number of complete tiles, as well as the location of the decorative elements.
Drawing this drawing, you can immediately determine the consumption of tiles, namely the number of full tiles. Buy tiles are recommended with a margin that leaves 10 percent.
we make preliminary work
The installation of ceramic tiles begins with preliminary work on the leveling and priming of walls and floor, the subsequent installation of sewer pipes and mounting frames for plumbing hinged. At this stage, it is necessary to produce electrical cables for lighting and domestic needs, and also to install built-in mixers.
After carrying out the preparatory work, it is possible to make a marking of the walls and the floor, according to the drawing. If you plan to lay tiles on the walls and floor, the facing works begin to be made from the walls. We measure the length and width of the working surface of the wall and calculate the number of complete tiles, taking into account inter-joint seams of 3 mm.
prepare a working solution
Now is the time to take care of the preparation of the adhesive composition. From the properly prepared adhesive composition will depend on the speed and quality of laying.
Helpful Tips
Already, many times repeated to the world, ... that the dry glue mix is poured into a container of cooked water. But not the other way around! Portions of the mixture to be filled should be small, while stirring the solution using a low-speed drill mixer.
The consistency of the solution ideally represents thick sour cream. If the glue turns liquid, then the tile can slide off the wall. It does not hurt to read the instructions from the manufacturer, printed on the package with the finished dry mixture. By the way, the process of preparing a working solution for tiles on the floor in the bathroom is no different from the preparation of mortar for walls.
laying the tile
At the bottom of the working surface of the wall, we mark the boundary of the first strip of whole tiles. Begin to lay the tile is necessary from the edge of the wall from the second row. Recall that in the lower part of the wall have a tile cut in the appropriate size. Mark the wall with vertical lines.
Vertical lines help to keep the orientation and create smooth seams between individual tiles. A solution of the adhesive is applied with a notched trowel. The height of the trowel teeth adjusts the thickness of the applied glue. Laying the subsequent rows of the tile is made by orienting the laid row. To create smooth, uniform in the thickness of the seams, we use plastic crosses.
After laying the last tile of the final row, the crosses are removed and the interlining stitches are cleaned.
grouting
Grout for tiles in the bathroom is made using a rubber spatula. To do this, we first moisten the gaps between the tiles with a damp sponge. We fill with seaming mortar joints between the tiles. After curing the grout in the joints, rinse the wall with a damp sponge.
The final stage of laying tiles in the bathroom is sealing the seams in the corners, as well as the joints between the tile and the bathroom silicone sealant.
Loading ...