How to make automatic gates with your own hands: automation of swing gates, drive of sliding gates, lifting and lifting and turning, rules for installing sliding gates.

Arriving after a busy day in his native penates, the driver leaves the car without much pleasure, in order to open the gate, go into the yard or garage, and then go out again to close the gate. Owners of private estates or detached garages have a natural desire to install automatic gates, especially since there are professional firms such as "Arc-Technician" who quickly and professionally help to solve the issue of installing automatic gates. Consider the options for automated gates and whether there is a possibility for a person to install them themselves.

Automatic gate, is it possible to automatically automate the gate

Our men are "handy" and "tadpole".

Many are able to use welding machines, a Bulgarian, a drill, etc. Having such skills, a man can easily cope with the manufacture of the gate.

For example, the simplest version of the gate - we cook from the metal corner frame frame in accordance with the dimensions, sheathed it profiled - the gate is ready.

But these gates are only suitable as swing gates.

And if you need to automate the gate, then the case is more complicated, because instead of the person should work automatics. A person must understand electrical engineering, understand what to connect and how it should work. Proceeding from this, we do not advise the inexperienced owner, to undertake such work, it is better to order the manufacture of such gates to the masters, but how can this be done? learn here.

But, the home master, can buy a complete set of gate automation and install it yourself.

Buying a set of automatics, you need to take into account the design of your own gate and know their weight.

Automatic gate, which is included in the automation kit

There are many types of automatic gate control, the differences are in the design of the drive of this type of automation.

But there are common elements, such as:

-self-locking drives, they can be left-handed or right-handed;

- The control unit includes a transformer and control boards;

- Various fastening components;

mechanical stops of different design;

- emergency release button;

-Remote Control;

-receiver;

-Setting of photocells.

Automatic gates, types of swing gate drives

For swing gates of automated control there are two types of drive - linear and lever.

Due to the simplicity of design and low cost, linear drives are more widely used.

This type of drive is very compact, which allows the drive itself to be placed on the goal post.

Linear actuators can be electromechanical and hydraulic.

Hydraulics works well and at low ambient temperatures, this type of drive has proven more reliable than electromechanical. The only drawback is considered to be a more expensive price.

To any set of automatic drive, an instruction is attached, following the instructions of the instruction, almost anyone can install it on their gates.

Automatic gate, sliding gate drive

The sliding gate is a heavy metal gate, and sometimes two.

The total weight of such gates can be 600 or more kilograms.

To move this structure, you need a reliable drive.

The drives of the sliding gates consist of an electric motor, a gear, a rack.

The price of the drive for sliding gates is in a wide range and directly depends on the weight of the structure being moved.

Automatic gates, lifting and lifting and turning for the garage

Lifting and rotary garage drives are quite complicated, as the gate itself needs to be lifted, turned and stretched out to the ceiling of the garage.

Therefore, the design includes a system of levers or guides (if the gate is sectional) and an electric motor.

In the case of installation of the lifting and rotating garage doors, it is necessary to purchase a complete set of gates and automatics.

Well, and if there is a gate, and there is no drive, it is necessary to pick up the automation of the same manufacturer as the gate manufacturer.

Automatic gate, by what rules is installed automatic swing gates

Before starting to install the automation, carefully study the manufacturer's instructions and do everything as the manufacturer advises. Knowledgeable people advise, install automation, drives at the top of the gate.

This installation does not interfere with the progress of the car, the car will not touch the automatics and will not disable it, and the car will not suffer.

For safety, photocells are attached to the gates. Photocells allow you to stop the movement of the gate, if the gate is crossed by a car or a person.

Photocells are fixed on poles, to a height of 50-60 cm from the ground.

Automatic gates, by what rules is installed automatic sliding gates

The automation drive for sliding gates must be mounted on the guide channel.

It is assumed that this channel you pre-concreted.

The drive is installed, as close as possible to the opening, between the rollers and carriages.

The limit switches are fixed to the rack rail, the photocells are fixed to the poles.

When installing photocells, you must strictly place them against each other.