Household pumping units are successfully used throughout the country houses, private hotels and cafes. Now, eyewitness accounts of a frightening monster called "Sewer system" seem naive and primitive. Fresh and juicy note Sololift2 broke the restrictions imposed on the location of plumbing in the immediate vicinity.
Content
Sololift2 starts and leads
A healthy alternative in the pressure drainage of country house cottages or cottages, in the absence of a gravity system, we can safely call innovative pumping units sololift2.
What are the advantages of pumping units of this type? Frankly, this is the complete freedom to design a bathroom for any part of the house to drain sewage with faeces from the toilet.
And if you add such positive qualities of pumping plants during installation:
• Stationary indoor installation
• Operational reliability
• problem-free (clean) service
• full compatibility of inlet and drain pipes,
then the Italian plumbing installations will please faultless work for a long time.
According to the conditions stated by the manufacturer, using a pumping unit, you can connect not only the toilet, but also three sources of drains, namely the shower, bidet, urinal and washbasin sink. As far as it is profitable, it shows time and practical exploitation.
Compact automatic pumping units
Compact automatic installations Sololift2 conquered users instantly. What distinguishes compact automatic pumping systems from previous models of this class? Of course, these are compact geometric dimensions and light weight, stunning design - capacious enough containers with slightly rounded corners, as well as the convenience of connecting and installing plumbing fixtures.
It is not difficult to install a pumping unit with your own hands. Therefore, it is impossible to leave without any due attention any model of the brand of sewage pumping plants.
sewage pumping unit sololift2 wc 1
Ideal option, suitable for pumping waste water from the toilet, washbasin and bidet, is a pumping unit sololift2 wc 1 sewer. Technologically, the plant is equipped with a manufacturer of a cutting mechanism for grinding the incoming solid particles, so it can cope with even hygiene items.
A powerful motor and pressure pipeline with an integrated air vent valve provide tremendous service. There is an additional opening for a combined connection.
Among the additional characteristics should be noted:
• maximum hydrostatic head up to 8.5 m
• rated engine speed is 2800 rpm.
• type of cable with rated current 3A H05VV-F
• power factor (Cos phi) - 0,92
• Thermal protection THERMIK S06-160-05.
To the sewage pumping unit Sololift WC-1 there is a possibility of connection, except for the toilet, additional drainage. It can be a washbasin.
sewage pumping unit sololift2 c 3
A sewage pumping unit sololift2 c 3 is a special design capable of discharging hot sewage. The temperature of the pumped liquid (domestic waste water) can reach 90 degrees, but this model is not intended for pumping fecal sewage of the coarse fraction.
The unit is used to drain sewage from household dishwashers and washing machines, as well as a bath or shower. Suitable for installation and installation in confined spaces, including built-in cabinets, shower trays and washbasins.
Package Included:
• cable length 1.2 m
• pipe adapters
• fittings-eccentrics
• Lugs for mounting and secure locking.
sewage pumping unit sololift2 d 2
The optimal option, economically justified from the point of view of wastewater disposal from the sink, bathtub or shower, is the sewage pumping unit sololift2 d 2. The problem of pumping the effluent of private house premises in which domestic wastewater without faeces is available is solved without additional material costs.
A sewage pumping unit can be connected to a bath, a shower and a washbasin. Unlike the existing brand installations, the pump unit sololift2 d 2 is distinguished by a smaller device height and a good horizontal layout, which makes it possible to mount directly under the bath or shower. In this case, the maximum length of the pressure pipeline is calculated from the amount of water lifting. Practically the pumping station is installed and installed below the level or next to the sink and shower.
The necessary components and components are included in the delivery set of the Sololift2 pumping units, which allow you to make the installation and connection yourself. However, the durability and practical operation of the pump depends on the nuances of connecting each model in particular.
How to connect models of pumping sewerage systems
this video will help.
Thus, it is necessary to determine where exactly and for what purposes the sewage pump sololift2 will be used.
There are options for installing a sewer pump for the toilet, for the kitchen, a pump designed for a water temperature above 75 degrees. So, for example, it is recommended to install the sewage pump for the toilet bowl directly behind the toilet at a distance of 40 cm.
How to install yourself
Any model of the sewage pumping system is:
• plastic housing with integrated pump
• a set of pipelines and adapters
• Automatics for regulation and control of pump operation
• cutting impeller for grinding inclusions in water to the required fraction.
For the operation of the sewage system, an uninterrupted power supply point of 220 V is required.
To locate the installation, a place is chosen that allows the sewer comb to be brought in with the condition of gravity flow. It is recommended to consider the diameter of the holes:
• Receiver in the station casing - 100 mm
• for drainage of domestic wastewater - 32 mm.
The discharge pipe must be cut into the main sewerage system of the room located at a higher elevation.
And this is how the maintenance and troubleshooting of sewage pumping stations sololift2 is carried out.
Loading ...