LED backlight, LED light, LED ribbon quickly entered our life and you can see them everywhere. Associations associated with LEDs, in the first place, is a festive decoration of New Year's streets, Christmas trees, shop windows. LED lighting is everywhere around us, almost any home appliances are highlighted buttons, etc. Accordingly, LED lights have appeared in the interior of apartments, where it is required not only light but also lighting.
Content
What is the LED?
We can say that this is a diode emitting light.
In fact, it is a semiconductor device, when an electric current passes through it - the semiconductor emits light.
Depending on the chemical composition of the semiconductor, the light can change its color and as a result we can see the colors of the rainbow or white color.
The advantage of the LED is bright light, uniform lighting - and this is known to be very useful for our eyes.
LED tape, what is it?
LED strip is a thin, flexible plateau with LEDs on it.
Such an LED strip is produced in rolls and, if necessary, it can be divided into segments.
The angle of illumination of the LEDs is 120 * and they shine in one direction.
The big advantage of the LED strip is the ease of installation, since LED tapes are produced on a sticky basis, and if there is no sticky base, then such tapes can be attached to clips.
Acquiring an LED strip, respectively, you get a 12V power supply.
The power of the power supply must correspond to the length of the tape and the number of LEDs located on this tape.
LED strips can be moisture resistant, but not necessary.
Therefore, if you decide to make the ceiling light in the bathroom or bath, designate the pool - you need a moisture resistant LED tape. Depending on your taste, you can choose the right color, but there are also multicolor ribbons that can change the color of lighting.
If you use a multi-colored tape, controllers are used for such tapes, they can mix colors and create different shades.
What are LED cords or duralights?
If the LED strip has a flat surface, the LED cords can be presented in the form of flexible polymer hoses, they can be transparent or colored.
In the center of the flexible cords are LEDs with a 360 * glow angle. The LED cord is connected to the 220V network.
A wide application of LED cords have been received for the evening decoration of buildings, for decorating Christmas trees and decorating the festive streets of the city.
The installation of LED cords is made using double-sided scotch tape.
How to use LEDs in the interior?
In the interior of apartments, mainly LEDs are used to highlight and highlight certain zones and individual elements.
At the same time, using the LED lighting, you can very nicely highlight the kitchen apron, make an LED ceiling lighting, designate niches in the wall.
Lighting not only identifies zones and elements, but also decorates individual objects, creates a very fashionable and spectacular appearance.
Backlighting is done at the joints of the floor and walls, on the furniture thereby give a cosmic view of your furniture or kitchen at night.
And if you are tired of the dullness of your room, by applying LED lighting, you will make your room festive, and the furniture will become mysterious and new to your eyes.
Very interesting is the television zone, bar counter, sofas, glass showcases.
In this case, in the daytime, you may not notice the installation of the LED tape, since the LEDs are placed in the slots, they can be found in the recesses, in the recesses.
This location of the LED backlight allows you to hide the light sources and only see a light glow.
There are places, such as a nursery or a staircase, in which you need at least a small permanent light source.
In such places, LED backlighting is the best friend, as minimum consumption of electricity and maximum effect.
The interior of the places where LED lighting is mounted, acquires some mystery and mystery.
And how much more convenient to use at night staircase, the steps of which are lit - everyone will understand.
Since the installation of an LED strip is very simple, an LED strip or an LED cord is often fastened on the cornice, under the window sill itself, they indicate the perimeter of the windows, they are attached in cabinets with glass doors, etc.
Helpful Tips
Everything should be in moderation and LED backlight does not fit every style and if your style is African, Japanese or country - the presence of LED backlighting will be out of place.
And if your interior is made in high-tech style, in the style of futurism and minimalism - the flag is in your hands.
Here the LED backlight can be used in a wide variety of colors and shades.
LED backlight will make your room highly technological and fantastic.
If you want to create a bedroom for adults, you can use red or scarlet light-emitting diodes - they can be mounted in a floor skirting, in a joint of a wall and a floor, to designate the bottom of a bed.
If you like to receive guests and noisy parties, using LEDs can create a disco room.
You can illuminate the bar and various objects with the help of LEDs.
And if you like a calm, measured life and a classic interior - do not use color lighting.
It is good to use a white or warm yellow-orange LED strip, the backlight should be minimal.
In such cases it is better to use LED lighting of the ceiling and niches, and in the kitchen to designate the perimeter of the apron.
Loading ...