Repair of interior doors advice, adjustment of interior doors: a door leaf is slack, an incorrect gap between the door leaf and the door frame, the doors do not close tightly, it opens itself.

The door was invented by people to protect their home from penetration by unauthorized persons without permission. The primitive dwelling of a man was satisfied with one entrance door, but gradually the living quarters began to be divided into several smaller rooms. This division allowed people to have their own space in a large family. In order to exclude extraneous noise in order to preserve their personal space, over time, people began to install interior doors. At present, interior doors not only divide the living room into rooms, but the doors themselves sometimes become works of art, so beautiful they are that they can change the appearance of the dwelling. And very disappointing when the purchased and installed interior doors do not cope with their task, do not close or open themselves, etc. We will try to suggest how the owner can eliminate these problems.

The interior door does not close, why

And it can not be closed for several reasons:

- the door leaf has jammed;

unnecessary gaps were formed;

-other problems with opening and closing.

As they say, each problem must be solved as it proceeds. A good owner, will try to eliminate the cause quickly.

Depending on the complexity, the detected problem can lead to the destruction of the interior door. Let's consider ways of troubleshooting for each specific case.

The interior door does not close due to the sagging of the door leaf

The sagging of the door leaf of the interior door does not rarely appear during the not very long life of the structure itself.

If the door leaf is massive and heavy, such a problem will appear almost always, and this is due to a distortion in the attachment points of the loops.

This shortcoming is not so terrible and it's quite easy to eliminate it yourself.

Spend a little time, adjust the position of the door leaf and twist the fittings.

Professionals are advised to put a rubber gasket into the joint of the canopy and the lower part of the door hinge.

But, not always the question arises because of a skew in the places of connection of loops, as sometimes it is required to adjust the position of the frame for the door, i.e. door frame.

In this case, you need a building level, a drill and bolts.

If the walls are plaster, you will need wooden dowels.

The interior door does not close due to an incorrect gap between the door leaf and the door frame

Over time, if a damp wooden door is installed, the design may be skewed due to the drying out of the wood.

With the development of such defects, it is necessary to work on the following scenario:

-If there was an unscheduled gap between the door and the box, which leads to the appearance of an unnecessary draft - check to see if there is a skew of the door frame. If you find a skew, use the level to adjust the position of the door frame and strengthen it;

-if the door is not closed due to a shift in the hinges, adjust the door hinges, if necessary, install rubber gaskets;

-If the gap from the end part of the door does not work out above by the specified methods, fix the additional bar to the end.

Interior doors close loosely, why

The interior door can not close tightly, and sometimes in the doorway the door itself moves with difficulties, for the following reasons:

- the door leaf has swelled, this situation is possible in premises with high humidity. Swelling, the door leaf can cling the floor itself, or cling the door frame. In this case, a joinery will come to the rescue. With the help of the plane, the excess material is removed from the end of the door leaf or the same thing is produced with the door frame;

- The door leaf itself opens if the doors are warped, especially if the door has a decent weight, perhaps self-opening the door. In this case, it is necessary to tighten the hinges, increase their resistance or install a door closer to the door. You can install the lock on the door;

-problems with the closing of doors can arise due to a malfunction of the door lock. Sometimes there is a displacement of the lock phyle tab in relation to the plate. In this case, the plate will have to be bored to the desired size or carry the fastening of this plate.

The door opens itself, why

The reason for self-discovery may be identical to the situation when the door closes itself.

The solution to the problem is to install a door closer or stoppers - limiters of the movement of the canvas.

You can try to repair the hinges, do not even repair, and slightly change the configuration of the hinges.

Support the door in the open position and remove the hinge pin.

With a hammer, you need to produce a very small, 1-2 mm, bend of the hinge pin.

Then put it in its place in the loop.

Malfunctions of doors, how to avoid breakdowns

To avoid breakage of interior doors, you need to monitor the condition of the hardware, door frame and door leaf.

Periodically it is necessary to do the lubrication of hinges, door closer, door lock. The door leaf and the box must be kept in proper condition, in time to conduct the treatment of wooden surfaces, to prevent drying and swelling.

Periodically adjust the position of the door leaf by the hinges.

When installing interior doors, install high-quality accessories and accessories.