To open the mysterious door to the third dimension, there is no need to be a fantasy or to make a trip to the Galaxy. It is enough to study the possibilities of decorating the interior with the help of 3d panels. Stunning properties of the drawing of three-dimensional panels allow to enter into the interior gypsum and PVC panels. It remains a little - to run for gypsum and to briefly study 3D-graphics.
Content
The virtual reality of three-dimensional panels
Today, the traditional finishing materials, irrevocably leaving in the past, are replaced by new, more attractive and practical, for example 3d panels. What attracts decorative 3d panels?
Let's say frankly that the virtuality of 3d space, embodied in the collections of wall panels, acquires the long-awaited practicality of application. Models of panels for walls are developed from polymeric materials, allowing to create interesting compositions practically for any style.
Due to the peculiarities of the product - attractiveness and variety of forms, installation and installation can be done independently without special preparation of the working surface. And, mind you, a wide range of colors of panels allows you to save on expensive finishing.
The virtual reality given to us in the sense of a rectangle of 3d panels is an excellent work platform for creating an interior of a modern house.
First acquaintance and impression
Three-dimensional wall panels are square or rectangular plates, on which a relief pattern is applied.
Any 3d panel is a relief at first glance with little matching qualities: the stiffness of waves and elevations on the surface of the panel, as well as the plasticity of the transitions.
Metamorphoses of glass, wood and metal in abstract drawings allow you to pour in and breathe new notes into the interior design of a private house or city apartment. The first impression of three-dimensional panels fascinates.
Imagination will instantly draw an equally impressionable interior, which can be created with the help of such panels.
Panels are successfully used for decorating walls, ceilings, doors and platbands. For the manufacture of 3d panels for walls use environmentally friendly fireproof gypsum and plastic.
Fans of environmentally friendly construction materials are lucky: 3d panels are made from eco materials (bamboo, wood).
Naturally, this is an expensive variant of interior decoration. More accessible can be called gypsum and PVC.
The magic of the square
The appearance of new materials intended for decoration, contributes to the opportunity to diversify the interior. According to the scale of the consumer, you can see that the construction "consumer basket" was heavier due to the weighty materials of gypsum - tiles and panels.
The reason is the magic strength of the square, in the form of which gypsum panels are made (600x600x30mm). Convenience of the square shape of the panel when installed on the surface is obvious, it is enough to establish them by the way of gluing or screwing them with screws.
Functions and features of 3d panels for the interior of the house
We will not hide that 3d panels are capable of performing several functions when creating an interior. The main function is still to create an original and stylish design. The volume of the image helps to increase the space, zoning the room and hiding the defects of walls or ceilings.
By installing three-dimensional wall panels, you can change the height or width of a small room. The compactness and suitable size of the panels are used for complete decoration of the living room wall, hallway and bedroom. In this case, the panels will be an independent element of the decor.
It will only be necessary to select the texture and picture, giving a sound to the picture with the help of lighting and spotlights. Fashionable panels can be used to decorate individual small areas.
fashion panels - trend of the season
Fashion - panels consisting of several three-dimensional panels form a single panel. Therefore, they must be installed in accordance with the drawing.
The relief pattern of the panel is not limited to one panel. It is possible to mount various contours, which allows to give the wall an exclusive look. Three-dimensional panels from the manufacturer are ready for installation and do not require additional processing. There is a possibility of repainting them.
How to install 3d panels
Installation of three-dimensional panels can be done using the prepared adhesive mortar and self-tapping screws.
Mounting of panels on glutinous solution
preparation of plates
Gypsum boards are recommended to be removed from the factory packaging before starting the gluing and arranged in a comfortable place for acclimatization. Then we measure the surface of the wall to determine the required number of panels in the horizontal rows and the vertical direction. For the installation of panels located at a considerable distance from the floor surface, it is necessary to provide a lower supporting rail mounted to the wall on the dowels.
priming of walls
Before mounting the panels, the working surface is prepared and primed. A special primer for surface treatment contains an aqueous dispersion of acrylic copolymers. The primer is applied in a traditional way with a brush, roller or sprinkler.
Drying time of the primer is 1 hour. The working surface of the panels is primed in one layer, for a seamless installation for grouting joints are treated only.
preparation of adhesive solution and its application
To glue gypsum three-dimensional plates, it is recommended to use a dry ready-mixed glue mixture on gypsum-based Knauf Perlix or Volma-Mounting.
Good advice: preparing a large amount of solution is undesirable, because the glue dries quickly and it is impossible to use the entire volume at once.
The adhesive solution is applied in small portions and simultaneously the toothed spatula is ground to remove excess.
installation of plates
Then the panel is placed on the marked place and lightly pressed onto the surface, sinking into the adhesive solution. Similarly, the entire horizontal row is set. It does not hurt to remember that given the properties of gypsum, it is recommended to leave the expansion joints between adjacent panels 2 mm thick.
If fixing dowels were used during installation, then with the help of repair putty the visible fastening points are shpaklyuyut and rubbed.
More complete information on the installation of panels is presented in the video.
Loading ...