For modern systems, thermal insulation is not enough to keep heat only. It would be desirable, that the thermal insulation served centuries, saving time and material means, was practical and economically profitable. Where to find such a diamond or diamond? It turns out that this dream diamond has already been created and his name is Korund.
Content
Thermal insulation Korund
Outdated and unpromising technologies of heat-insulating materials, limited by the use of traditional components, are now supplanting innovative technologies.
An example is the ultrathin liquid heat insulation Korund. It is indicative that the field of application of liquid thermal insulation has significantly expanded, due to the successful use for thermal insulation. With the use of liquid heat insulation, it is possible to produce insulation of external and internal surfaces:
• water supply and conditioning systems
• building envelope
• facades of buildings and interior walls
• pipelines and ducts
• chimneys equipment
• Steam pipelines of boilers.
What is the secret of such a vast geography of application of corundum insulation?
Composition and properties of liquid thermal insulation
To begin with, the liquid heat insulator is the owner of unique thermal properties that create plasticity and flexibility of the coating. The composition of the thermal insulation material is as follows:
• high-quality acrylic binder
• Original texture of catalysts and retainers
• ceramic fillers of ultrathin-walled microspheres.
Therefore, unique thermal insulation properties are the result of the molecular impact of discharged air, which is in the hollow spheres of a ceramic filler. In addition, special additives introduced into the corundum exclude the formation of fungus and the appearance of corrosion in conditions of high humidity. Thermal insulation material in appearance resembles an ordinary paint creamy consistency, is an opaque white suspension.
Regardless of the areas of application of liquid thermal insulation, corundum is a basic composition with stable adhesion to metal surfaces and building materials. Thermal insulation coating Corundum:
• temperature resistant (operating temperature from -60 ° C to + 200 ° C)
• watertight
• Weatherproof.
Insulation or heat insulator
Being a complex multilevel structure that minimizes the existing methods of heat transfer, the heat insulator presents an increased interest: "Corundum is a heater or heat insulator?".
However, it is necessary to distinguish between these concepts. The principle of the heater is based on the physical thermal conductivity of the material. Therefore, the effectiveness of the heater depends on the thickness of the insulation. On the contrary, the principle of operation of a heat insulator is based on wave physical properties. The thickness of corundum of ultrathin thermal insulation is in the range from 1 to 6 mm. Shocking the limits of the minimum thin thickness of the insulation layer, this is perhaps the main advantage of Corundum over existing thermal insulation materials.
How to choose the thermal insulation Korund
Choosing a liquid insulation should be for its intended purpose, namely where and for what it is planned to apply the material. Here are the following recommendations for use from the manufacturer of liquid insulation:
• for the insulation of pipes under the foundation, it is recommended to use Corund Classic, Facade and Anticorrosion, with a layer thickness of 1.5 mm.
• Corund Classic and Anticorrosion with a layer thickness of 1-1.5 mm are used to eliminate the condensate phenomenon for cold water pipes.
• for the covering of pipes in a room or in the open air, all modifications of Corundum can be applied with a layer thickness of up to 1.5 mm.
• to create a comfortable environment in the presence of a "Cold Wall" choose Corundum Facade with a coating of 1-1.5 mm.
• to create a complete elimination of the freezing of the wall will allow Korund Facade with a coating thickness of 2.5 to 3.5 mm.
• with a floor insulation, Corund Facade with a layer thickness of up to 1.5 mm.
Consumption of the material corundum of thermal insulation depends on the modification.
Rules and techniques for applying thermal insulation corundum are presented in the instructions for use from the manufacturer. Recall that the heat insulator can be applied using a paintbrush, roller or paint sprayer for significant volumes and areas of thermal insulation. The main rule when applying a liquid heat insulator is that the thickness of the application of the layer should remain 0.3 mm and not be thicker than 0.5 mm. The subsequent layer is applied after the layer of the previous one has dried completely.
Consumption rate when applying liquid corundum corundum are:
• when applying a layer of paint brush (one layer) - 0,5 l / sq. M.
• when applied with a roller (one coat) - 0.4 l / m2
• when using the spray gun - 0,26 l / sq.m.
The main modifications of the liquid heat insulator
The main industrial modifications of liquid thermal insulation are:
• Korund Classic
• Corund Anticorc
• Corundum Facade
• Corund Winter
All properties of the liquid heat insulator are presented in the Corund Classic modification, which is considered the basic modification with the possibility of using for subsequent layers application.
Thin heat insulator Korund Classic is used for thermal insulation:
• Heat exchangers, water heaters, boilers and hydrants
• facades of buildings, interior walls, roofs and slopes of windows
• ground and underground oil pipelines and gas pipelines
• pipelines for cold and hot water supply
• air ducts and cooling systems for tanks.
The thickness of one layer of Corundum Classic from 0.3 to 0.5 mm.
Composition of thermal insulation Corund Anticorcallows not only to preserve the corrosive metal, but also greatly facilitate the preparatory work to remove rust. It will be sufficient to manually remove the layer
crumbling rust and apply the first layer of Corund Anticorv.
For subsequent layers, and their number can reach three, you can
use the basic Corundum Classic.
In this case, it is recommended to adhere to the technology of application and drying of each layer declared by the manufacturer.
The obtained protection against corrosion combines also the dielectric properties. The thickness of one layer should be 0.4-0.5 mm.
Liquid heat insulator Corundum Facadeembodied all the advantages of a facade paint and vapor barrier. "Finesse" is that the layer can be applied 1 mm thick, while the quality of the thermal insulation will not be different from the quality of several layers. This modification of Corundum is literally intended for concrete surfaces.
Viscous consistency of the heater allows you to paint even on vertical walls. By the way, in this modification, the exceptional qualities of the material are waterproof and vapor permeable.
The walls and facades of buildings treated with Corund Facade do not heat up in the heat, because corundum coating can reflect a significant percentage of solar radiation. The unique possibility of using Corund Facade together with tinting pastes allows you to stylishly decorate the building.
Unmatched Properties Corund Winterto fully allocate liquid insulation from the faceless mass of heaters. Thermal Insulator Corundum Winter can be applied in the case of frost minus 10. Frost resistance and cold resistance to the material are attributed to acrylic polymers, antiprene and inhibiting additives.
Corund Winter heat insulator is applied on concrete, plaster and brick surfaces with an allowable humidity of 5 percent. The thickness of the layer reaches from 0.3 to 0.5 mm.
Loading ...