Wireframe technology excellently took root in the countryside. It is a fast and easy-to-erect construction, which almost everyone collects with their own hands. But an indispensable condition for normal functioning is a properly prepared area under the pool. How to do this?
Content
Types of frame pools
Today, the capital pools built on the sites of a private house have been replaced by practical and easy-to-assemble frame pools. Manufacturers produce several types of frame pools, allowing you to buy a pool frame for dachas:
• stationary
• all-weather
• seasonal.
stationary pools
Stationary carcasses multisection. The sections are made of various materials - plastic, steel and duralumin. The design of stationary pools is quite rigid. Installation is carried out once without subsequent seasonal disassembly with the use of bolted and lock joints.
Stationary basins for caravans are deep-seated with a board height of up to 2.5 m. The shape of the basin of fixed basins can be of simple geometry and is difficult to bend, and also in the form of polyhedra.
The design of the basin, sometimes containing up to 20 tons of water, is reinforced with a metal wall and protected with a layer of polymer.
The water-filled construction is distinguished by its impressive weight, so the preparation of the area under the pool is serious. A pop-up question: "What to put a frame pool" will pull a lot of additional costs, which will increase the cost of installation to the space figures.
all-season pools
All-season pools are designed for almost any season of the year, so they are not dismantled for the winter season. From seasonal pools, they are distinguished by a more powerful side wall (more than 0.8 mm).
The frame is reinforced not only by the steel side, but also by a frame with supports and crossbars, which enable it to withstand the forces of punching frozen water. A low foundation pit under the pool all-season several times rammed and covered with sand and gravel.
But all-season and seasonal collapsible pools can dramatically reduce installation costs.
seasonal
Seasonal frame pools are collected and installed on the site at the beginning of the summer season. Structurally seasonal pools consist of such elements:
• Prefabricated frame made of metal pipes
• connecting elements and assemblies
• bowls of the pool in the form of a bag.
The frame of the seasonal basin ensures the construction is reliable and durable, preserving the shape of the bowl after filling with water. Weight design of seasonal pools is low and can be 5-7 tons. Nevertheless, this does not remove the issue of equipment for the pool installation site.
Assessment of soil condition
Before preparing the site for the subsequent installation of the pool, it is recommended to assess the condition of the soil. For a stationary frame pool, the condition for determining the quality of the soil is mandatory.
The ideal option for assessing the state of soil and soil on the site is the determination of the particle size distribution, which provides specific data on soil quality.
If there is no possibility to assess the particle size distribution, and you intend to establish a seasonal basin, you can restrict yourself to a visual inspection of the site.
Preparation of the site for the pool
Preparatory activities for creating a platform for a skeleton pool consist of the following stages:
• choosing the location of the pool
• Layout and layout of the plot
• removal of the vegetation layer
• the creation of a sand pillow and its ramming
• laying of the underlying film.
choice of places for the pool
The choice of the location of the frame pool should be dictated by the availability of free space, the close location of the power source, the source of water or the possibility of laying a water main, the place of water discharge from the pool as it is replaced.
Such criteria are reasonable, because they will ensure the normal functioning of the frame pool.
The selected place for the site is prepared: cleaned from foreign solid objects. Further activities will depend on the type of structure of the frame pool. For some models, it will be necessary to dig a foundation pit, while for others it will be necessary to lay down the underlying layer.
layout and layout of the plot
In addition, at this stage, the preparatory work is aimed at finding out the layout of the site, namely the angle of inclination, which allows to draw a conclusion about how to make a site under the pool.
Let's say that if the angle of the slope of the surface of the section exceeds 5 degrees, filling the pool bowl to the edges will be problematic. Plans for site planning include the following:
• vertical and horizontal marking with pegs
• removal of vegetative soil
• filling the surface with sand and rubble
• Backfill alignment using rule
• Tamped area for 2 times
• laying of PVC film with a subsequent layer of expanded polystyrene
• laying the underlay from the pool kit from the manufacturer.
The layout of the plot depends on the shape of the frame pool. For a rectangular basin, this is a simple configuration, and for a round one it is necessary to draw a circle on the terrain with the help of a peg and the line attached to it at the end.
excavation
Removal of soil with a vegetative layer is obligatory. Otherwise, excellent conditions will be created for vegetation, and it will grow under the bottom of the basin.
The vegetative layer of soil is removed by trimming the turf with a bayonet shovel. Then the ground is deepened to a height of 40 mm, making room for the sand cushion and slabs. After the removal of the vegetation layer, we make control of the verticality and horizontality of the site. The control should reveal the places of elevation or lowering of the terrain, which must be eliminated by creating a sand pillow.
creation of a sand cushion
To create a podsypnogo layer using fine sand, which is distributed to a thickness of 20-30 cm. It is recommended to flatten the surface of the sand cushion by the rule in the direction of movement from the center to the edges of the site. The next step after the creation of a padded layer is its tamping with the use of manual tampers.
The quality of the rammer should correspond to the density of the sand pavement layer.
If necessary, rammer is produced for 2 sets.
laying of film and underlayment
After the filling and tamping of the site, it is covered with PVC film. The joints of fixing the strips of the film are fixed with an adhesive tape.
The final version of the site for the frame pool is laying the underlying layer, which is laid by the manufacturer in the delivery.
Ideally, this should be a flat surface, which was created. Now you can start installing and installing the pool.
More detailed and detailed information is shown here.
Loading ...