A ready solution for creating the zone of the highest comfortable stay in the indoor pool of a country house can safely be called air dehumidifiers. Stylish attractive design and powerful equipment performance make it clear that ventilation and dehumidification in the pool is a serious matter and can not wait. What are the criteria for choosing equipment?
Content
On what factors does the microclimate in the pool
A comfortable visit to the indoor pool of a country house and the creation of a peculiar microclimate is associated with properly organized ventilation and air dehumidification.
Therefore, the layout and placement of engineering systems to maintain the necessary temperature and humidity regime is a major problem. What should be remembered when designing and designing ventilation systems, as well as draining the pool air?
The main factors affecting the microclimate of the basin can be called the following:
• constructive-architectural features of the whole basin
• Normative sanitary and hygienic requirements
• direction and speed of air masses and flow
• presence of high temperature and humidity
• materials for finishing the pool.
Therefore, to solve the problems associated with high humidity and the emergence of condensation of moisture in the pool, it is possible with the use of dehumidifiers. What kinds of dehumidifiers exist?
Preliminary calculation of pool ventilation
The need for a preliminary calculation of the ventilation of the basin and the selection of the type of equipment is confirmed by practice and regulatory documents.
Calculation of the pool ventilation is carried out using ready-made programs on the computer.
For the calculation and selection of equipment input the initial data that characterize the pool area:
• geometric dimensions of the room, describing the height, length of walls, total area of the water mirror
• the presence of water attractions, which are a potential source of increasing the humidity of the pool area
• Estimated number of people in the room
• Percentage composition of the floor surface of a pool filled with water.
Based on the data entered, the program will calculate the total amount of evaporating water and propose a list of equipment for ventilation.
To refine the calculation, use a correction table. For example, for a pool area of 32 m2, with a room temperature of 24 C, a water temperature of 22 C, an air humidity of 60% according to the tabulated data, the amount of evaporating water is 82 g / m2 per hour. Now 32 x 82 (tabular data) will give the desired number - 2,624 g / h.
Determining the amount of evaporating water from the surface of the pool, you can choose the type of dehumidifier.
Types of dehumidifiers for swimming pools
The following types of air dehumidifiers should be distinguished:
• universal
• Channel
• Supply and exhaust installations.
Therefore, before buying a dehumidifier for a country house in the pool, you need to decide on its future location in the room, as well as learn in detail about the design and functionality and technical characteristics.
universal dryers
The universal air dehumidifiers for the pool have significant performance, reliability and protection class IP44, they can be placed on the wall, on castors included in the delivery, using concealed installation. For universal air dehumidifiers for the Cooper & Hunter pool is characterized by high-performance work in pools of a small area of up to 15 m2.
Universal desiccants are equipped with rotary compressors Toshiba or Hitachi in a noise-absorbing housing. The refrigerant is refrigerant R407C. The universality of the dehumidifier is not only in the possibility of installing equipment in the traditional way, but also in the type of the outflow of dried air: vertical and horizontal. The convenience of using universal air dehumidifiers is confirmed by the practice of application: the information of the settings of the digital humidistat is displayed on the LED display, including the auto-defrost function.
Universal desiccants of any design (wall and floor) can be installed and connected independently.
channel dehumidifiers
Channel dehumidifiers for the pool can be confidently considered climate systems that can perform trouble-free operation of equipment, but also automatically control the parameters of the microclimate. In practice, channel driers for the dantherm swimming pools in conjunction with the ventilation system will provide the optimum temperature of the ambient air and humidity.
As a high-performance equipment, channel dehumidifiers are installed and installed in a special room adjacent to the pool. Therefore, to start the channel dehumidifier for the pool, a remote duct humidistat will be needed. In addition, the installation of a duct dryer will require the assistance of a qualified technician. All channel air dehumidifiers are equipped with:
• Optional water cooled condenser
• radial fan
• rotary compressor
• Drainage connection
• drain hole
• Removable filter.
Dehumidifiers channel equipped with an integrated automation system and a control panel that reflects the current mode of operation of the equipment.
Duct dryers of the third generation of Variheat III are already entire systems in which an additional possibility of a fresh air admixture is introduced. There is an additional possibility of heat recovery for pool water.
This principle of condensation is reflected in the equipment of an air dehumidifier for the aerial pool. Therefore, only the presence of the "heat pump" effect, in which the outgoing air is warmer than the incoming one, has the opportunity to increase power consumption several times.
And, finally, the optimal option for dehumidifying air in the pool is the intake and exhaust machines.
air handling units
Installations of supply and exhaust for swimming pools are equipment that performs the tasks of air conditioning and dehumidification.
The configuration of the supply and exhaust systems includes the following elements:
• installation for pools with single-stage air recuperation and its recirculation
• installation designed for a pool with multi-stage heat recovery, a cross-flow heat exchanger, with heat pump recirculation.
Thanks to the operation of the plate heat exchanger and the heat pump, heat recovery is achieved. The following items are included in any supply set of the supply and exhaust system:
• Heat pump
• recuperator
• heater
• fan
• Filters
• IP.
The delivery kit from the manufacturer is designed to prevent condensation of moisture and is intended mainly for indoor swimming pools.
The choice of an air dryer for the pool of a country house should be considered and justified, because equipment of this type is quite expensive. But you are guaranteed to purchase excellent European-class equipment for the maintenance of the pool.
Loading ...