Happen in the life of a moment when the environment of the home environment radiates harmony and balance of feelings. Beautiful walls in stripes will put emotions in order and reload the "matrix" of living space. For this to happen, you need to pick up paint, paint accessories and paint the walls.
Content
Decoration, walls in stripes
It is known that a popular way to decorate and decorate the walls of the room are walls in stripes. Wall decoration in stripes in the interior allows you to give rhythm and dynamics to the room, enlivening and attracting attention.
The attractiveness of the bands is inherent in nature itself. We like the stripes of the magic rainbow bridge after the rain and the living striped contrast on the animal's skin.
So why not create a striped miracle in an apartment or a private house. Undoubtedly, wallpaper stripes from the manufacturer are the best option, but the walls can be painted with your own hand in the desired and properly selected color.
At the same time, any design of walls in a strip is created from the best motives and opportunities. By the way, the technology of creating striped walls is simple and accessible. It remains to prepare sketches, make measurements and markings, purchase the necessary painting tools and go on the road, or rather, in a striped flight.
Naturally, the starting point and the route in the direction of how to paint the walls with strips, we will consider the coloring technology.
Technology of painting walls in stripes
It is noteworthy that the basic technology of painting walls in a strip can be confidently applied for an even and embossed surface. The strip looks equally appealing on a concrete base, on convex block house panels and walls with ledges or niches.
The main thing is to observe the proportions of the width of the strips and successfully apply the paint. In the end, the question: "How to paint a wall in stripes" will be successfully resolved.
The technology of painting walls consists of the stages:
- create a background
- marking the surface of the strip (vertical or horizontal)
- sticker of paint tape that creates border stripes
- coloring the bands with the required color
- removal of tape adhesive tape.
Before the beginning of the marking of the walls for painting, it is necessary to make a simple calculation of the whole number of strips.
preliminary calculation of the width of the bands
To do this, determine the width and length of the walls and divide by the width of the strips. You should get an integer, the number of whole strips can be adjusted, increasing or decreasing their size. Adjustment of the widths of the strips can be made due to the bands of light color.
background
As a basic background, when painted, a prepared (clogged) working surface of light color can act. A basic tone can be created using matt acrylic paints with excellent opacity and economy of consumption of a material that does not have an odor.
surface marking
Armed with a level, corner and pencil, we break the wall into horizontal or vertical lines. For example, if you create a horizontal strip on the horizontal surface for the wall, we have and note the width of the required bands.
Then, to the indicated landmarks, we apply a vertical level and mark the lines corresponding to the edges of the bands. Mark the cross with the future colored stripes.
Similarly, mark the surface for the wall in a vertical strip, creating a working vertical and noting the width of the vertical stripes.
sticker of paint tape
The most practical material that can withstand a layer of paint and prevent its penetration inside is a paint tape that must be glued tightly to the surface.
features of paint tape
For stickers, it is preferable to use adhesive tape that does not leave any traces after removal and have a tenacious adhesive layer. The multivariance of the degree of tackiness of the adhesive tape allows you to select the tape depending on the type of surface and paint. There are paint tape adhesive tape, designed for professional contouring and pasting surfaces with a carrier layer of smooth crepe, moisture resistant, capable of withstanding the stress of 75-80 g / m2 with a solvent-free adhesive composition.
Helpful Tips
Select the tape to create the bands, preferably by their intended width. The most popular are tape - 50 mm tape. But the width of the bands can be combined by gluing two tape of adhesive tape of different widths: 50 mm + 30 mm or 30 mm + 10 mm. The least possible capacity of the paint is the ribbon on the crepe and lavsan base.
we paint the walls in stripes
For the coloring of the stripes we select a narrow flat brush number 5 -7 and a velor miniature roller on the handle. The selected paint, for example, matte Dulux Trade Vinyl Matt, is applied top-down by one movement of a well-filled roller. When applying the paint, you can safely touch the edges of the adhesive tapes tape. After drying the original coat of paint, apply a subsequent layer.
Then the paint tape is carefully removed. You are at a loss when repairing the question, how to paint the walls in stripes of different colors? Describe the sequence of color bands on the sketch and mark on the wall. Apply the original paint to all the stripes in one color, then the other and leave to dry. For example, a pulsating combination of bands of tangerine color with a warm color of cinnamon and a binding color of tender vanilla will provide the walls with a complete imitation of expensive brand rasch wallpapers.
Helpful Tips
The main tool for applying paint and creating a smooth painted surface are structural roller. But of particular interest is the creative line - rollers with nozzles, creating a relief coating. The coating of the working part of the roller can represent strips of pieces of skin. The originality and effectiveness of painting in this case will be guaranteed.
If for a flat surface the technology of painting the strips is clear - leading a roller up and down on a tape that has been directly pasted to the tape, then for embossed surfaces, such as a convex and volumetric block of houses, the creation of strips is somewhat complicated. Painting Scotch tape is now recommended to gently stick on the convex part of the surface along the route of the strips.
Then the convex part of the walls is painted in the traditional way, using a spray gun. After the paint has dried, the paint tape is removed.
How to paint the walls with stripes will help video.
Loading ...