It is peculiar for a person to surround his dwelling and resting place with various beautiful trifles, they are able to transform a cottage and a garden plot, make their appearance unique and attractive. Moreover, for the manufacture of such handicrafts do not need any expensive materials, the course will go all that will be at hand. Of course, that made, for example from plastic bottles, chamomile, mushrooms or butterflies looked interesting will have to try and show maximum creativity and imagination.
Content
- 1 Crafts made of plastic bottles
- 2 How to make a palm from plastic bottles
- 3 What to Make of Plastic Bottles
- 3.1 description of the manufacture of a butterfly from plastic bottles to decorate the gazebo
- 3.2 flowers from plastic bottles
- 3.3 pots and flower pots for cottages from plastic bottles
- 3.4 chamomile from plastic bottles
- 3.5 elegant and practical gazebo at the cottage of plastic bottles
- 3.6 curtains made of plastic bottles
- 3.7 animals made from plastic bottles as the decor in the garden
- 4 Puff of a plastic bottle
Crafts made of plastic bottles
Bottles made of plastic - this material is very affordable and not expensive. In addition to direct appointment, there are many unusual ways to use them. Plastic, as a material for creating an incredible decor, liked, and soon loved the enthusiasts to make own hand. And all because, the skeleton of the bottle can easily be deformed into the required shape without special application of force.
Also, the special strength and endurance of this material pleases. Having a little imagination, raw material and desire, it is quite possible to make incredible and amazing things that will radically change the decor of the front garden, kitchen garden, cottages as a whole or any living space.
The most important thing in this business is to collect a fairly large number of plastic eggplants that would be different in size and in different colors. After that, you can give vent to your imagination and release your imagination.
How to make a palm from plastic bottles
It should be noted that most of the products associated with trees, bushes and other analogies are done on the same principle. Directly for the work itself will be needed - plastic bottles, scissors, wire and special paint for plastic. In the manufacture of palms use the lower and middle parts of bottles, mostly dark colors. Those parts that are supposed to perform foliage should be greenish shades. The assembly process is as follows: the bottom of the plastic container is cut, then the same cut off bottle is dipped into it and so on, until the desired height is formed. Through each part pass wire. It passes through the neck. Then the top is attached from the top with a green bottle with a cut off bottom. Now you need to cut from green bottles a large number of approximately the same stripes, stick them in such a way that they fall down like the leaves of a real palm tree.
Performed in a similar manner several palm trees, will be an extraordinary decoration of any infield and garden. Such a picturesque piece of decor will bring pleasure in all seasons. Plastic material is quite strong, so the product from it is not afraid of scorching sun, nor severe frost, nor torrential rain. Places where slices were made on the bottle (in order to comply with safety measures) must be melted.
It is possible to attract children to work of this type. They will take an active part in the new production process with great interest.
What to Make of Plastic Bottles
description of the manufacture of a butterfly from plastic bottles to decorate the gazebo
Multicolored, motley butterflies are sure to become an original decoration of the décor of any country house. They will look particularly good in the arbor. First of all, to produce such an insect, it is necessary to cut out the middle of the bottle's capacity. Color can be any. Now we need to make a template from cardboard in the form of insect wings. Apply to the plastic and cut at the edge. Then attach the wire on the fold line.
To decorate this homemade butterfly, beads of different diameters are quite suitable. Also, the wings of an insect can be painted with acrylic paints and given them a pre-conceived look. More harmoniously, the butterfly made in the same color palette as the gazebo will look. Individual colored flower beds in the garden of plastic can also be made by hand.
It is not at all difficult to create from the plastic material many useful and beautiful trifles for a country house, elements of landscape design, including curbs for flowerbeds, to trim greenhouses and canopies, trellis bases for curly flowers and the like.
flowers from plastic bottles
Flowerbeds made of plastic containers are a common element of decor. You can see them not only on personal plots, but also near solid high-rise buildings. To create such an unusual flower bed you will need plastic flasks of the same size and in the same color scheme. If there is time and desire, they can be painted using one color, or all the colors. Making out the boundary of such a flowerbed, you can dig along the perimeter of the tank to a certain depth. After the end of work, a rather original fence is formed.
pots and flower pots for cottages from plastic bottles
Plastic bottles are quite suitable for creating hanging and desktop flowerpots. Cutting the bottom of the bottle will result in a cylindrical shape. Operation of the upper part will create a cone-shaped flower pot.
To give such pots a special individuality, you can trim them with corrugated colored paper or paints, yarn or cloth. If the plastic is slightly heated, then it can easily be deformed into any desired shape and make a variety of unusual flowers.
chamomile from plastic bottles
It is not difficult to make a daisy from plastic containers. This requires white flasks or simply transparent ones, which can be painted with white paint. Bottles should be prepared more, flowers are better to make large, the length of the petals can match the height of the bottle. You can also use milk containers for work.
In order for the flowers to have a beautiful shape, make a sheet of paper for them, which is a circle with a diameter of up to 10 cm and several leaves. Cut the circle of the desired shape, cut it into petals of a rounded shape. In the center of the workpiece, make a hole with an awl. To give the petals a beautiful bend we heat them over the candle.
To prepare the core of the flower, use a yellow bottle or paint a transparent orange or yellow color. From the green bottle we cut out several elongated leaves and sepals, warm it and give it a beautiful shape.
All the prepared fragments of the flower are connected by a piece of wire. Similarly, you can create other flowers, this will require colors of different shades or colored plastic.
elegant and practical gazebo at the cottage of plastic bottles
If you need to build gazebos, supports for climbing plants, greenhouses and greenhouses should have many similar plastic bottles, assiduity, imagination, creative approach to the organization of the upcoming event. Fastening of the arbor is done with small screws. In cases where it is planned to use whole bottles for similar construction, it is advisable to fill them with earth or sand. This will add durability to the design.
When the frame is made, it makes no sense to overload it. In such cases, it will be beneficial to look like fabric or similar protective cloths attached to containers to create lateral moments of the structure.
curtains made of plastic bottles
Plastic curtains made of bottles on doors or windows will give the living space an interesting, distinctive design. To produce them you will need a lot of plastic containers. Their number will directly depend on the area of the window or doorway. Production begins directly with the cutting of the bottom of the tanks. The height of the cut piece must be small. Now you need to connect the bottoms.
A thin wire or line is suitable for the connection. Curtains will be much more interesting, if for their production to take containers of different sizes and colors. If there is time and desire, you can make curtains of transparent material, and then decorate it with acrylic paints.
animals made from plastic bottles as the decor in the garden
It is not difficult to make animals from plastic.
For example, to produce a plastic piglet, you will need a five-liter container. It will make a pig's body out of it. To create ears and legs, a piglet is suitable bottles of conventional capacity. After the end of the mounting works, it will be enough to only paint the structure with pink acrylic and install it in the garden or vegetable garden.
Puff of a plastic bottle
In any home, a soft seating area is useful. To build a soft pouf or a stool is possible even for a woman. For this work, you need plastic material and soft upholstery.
For example, for the production of a medium sized puff at home, you will need an adhesive tape, scissors or a knife and about 40 two-liter eggplants. The shape of the product must be thought out in advance. There are only three variants of the form - an oval, a circle and a square. The most common form is a square. To create such a pouffe, you need to take a pair of bottles. Divide them in half. Cut half of the bottles about 1/3 of the top. Then insert the whole into the cut off bottles, screwed down the lids. Each specialist glass is advised to wrap a cloth or newspaper, wrap it with adhesive tape, so that it does not creak directly during operation.
The next step in production is the design and connection of all the glasses. It will be safer to fasten them when they stand in the following sequence - the first glass with the lid up, the second lid down, the third up, the fourth down and so on. In total there should be four such series. All glasses in them are fixed with an adhesive tape close to each other. The design will be stronger and more reliable if the arrangement of the covers is staggered.
Round pouf is also not complicated in manufacturing. To create it you need the same glasses as in a square. In this embodiment, the formation of the mold begins with a central one glass, around which an alternating pattern with a square example is fixed around the circle with an adhesive tape.
To give the product an oval shape it will be sufficient to initially fix two glasses in the center. Then make the fastening as well as the round variant.
After the above actions, you can tighten the product. To begin this work, you should prepare:
- scotch tape with a width of 50 mm
- scissors
- pencil
- centimeter
- big needle
- strong threads
- zipper
- iron
- sewing machine
- jig saw
- plywood
- newspaper or paper on which a pattern will be drawn
- foam rubber 50 mm
- stretch fabric
- the fabric from which the upper cover will be made
- material for decor creation (braid, buttons, ribbons, fringe and the like).
Plywood is used for leveling the bottom formed by bottles. It is cut out of two suitable square (or circle, or oval, depending on the product of what form is planned). The same squares must be cut out of cloth. Plywood bases firmly pressed against the construction of bottles and wrapped with scotch tape.
In the next step, the product is softened. For this, the top of the product and the side part are cut from the foam rubber. Do this in accordance with the paper pattern. To the pattern of the soft part, before cutting, it is necessary to add on each side the number of centimeters that corresponds to the thickness of the foam rubber. If desired, the detail of the upper soft part can be duplicated - this will add extra softness to the operation. Foam parts are wrapped around the plastic base of the pouffe and fasten them over the edge with threads stretched in a large needle. Do not over tighten the thread: it can break the foam when pressed.
Foam from above need to be sewed with a cloth. It will protect it from mechanical damage and increase the operational period. Cut out the fabric all on the same paper pattern and also sew on the already formed structure. Such a protective bag should sit firmly on the foam rubber, but at the same time be easily removable for washing. Here, a lightning bolt is useful. It is sewn vertically.
On the protective bag, for the same pattern, a bag of dense non-branded fabric is cut out (an old tapestry or denim unnecessary things will do), which serves to decorate the product. Sew it just like the previous one. He also should sit tightly on the pouf and also should be with a lock for easy removal. You can decorate it with any buttons, fringe, shreds of colored fabric, braids and so on. The main thing is that all this should be in moderation, with taste and combined with the general style of the room.
Loading ...