Galoshnitsy in the hallway, how to choose, useful tips

  • admin
  • August 28, 2016
Galoshnitsy in the hallway, how to choose, useful tips

Any owner of the house wants to keep the hallway clean. But the whole impression can instantly spoil the dirty and untidy shoes, placed in a mess on the floor. What furniture for the hallway you did not pick up, galoshnitsu considered the best option. Attractive and unobtrusive design, ease of assembly and capacity of the curbstone meet any requirements. There is no choice! By the way, the versatility of the shoe allows to use furniture also for storing small, but such necessary things.

New ways of storing shoes 

Modern methods and methods of storing things in cabinet furniture have now gained total appreciation. Simple, easy to open chests of drawers, wardrobes and PAX systems have become permanent residents of the hallways.

tumba-dlya-obuvi-v-prihozhuyu-2

The convenience and practicality of using modular furniture for footwear is confirmed by the practice of living in small apartments.

Among new models of furniture, the shoehorn does not take the last place, providing order in the hallway with accurate storage of shoes.

Image 1 about

Unlike the ancient prototype of the place of storage of things - a powerful forged chest, the shoehorn for shoes in the hallway takes up little space.

Compact size, no rear legs, allowing you to install the shoe close to the wall right above the skirting board.

Image 2 years

In addition, the freely opening design of several compartments allows you to place the cabinet on the floor in any convenient place. For what reasons should you choose furniture for shoes and halo in particular?


32858f7a03ebbfbdf80264c72c6826c0

Construction of galoshes

Structurally shoe (galoshnitsa) is a rectangular or square body with a facade on which are located 2-3 polochki for shoes. The dimensions of the halos can be different depending on the needs of the consumers. There are several types of shoes:

• Enclosed closet for storage of shoes and small accessories

• open door cabinet with inclined shelves

• a shoe with a seat.

deks-tumba-obuv-oreh-02

Initially, it is assumed that the capacity of the walk-behind is designed for several pairs of shoes of different sizes. Unfortunately, the galoshnitsa is not intended for drying shoes, but performs only the functions of temporary storage of used footwear. Models of shoes for shoes in the hallway can be high up to 1.2 m, wide to 30-40 cm and narrow to 30 cm.

Image 1

The most comfortable are the shoes with a seat or with mirrors.

catalogue_2044

A seated portion of the shoe can be used to store shoe brushes and shoe care accessories. The mirror located on the console of the door mirror will complete the furniture suite of the hallway.

A narrow galoshnitsa for shoes does not take unnecessary place and allows you to rationally use the space of a small hall. The mechanism of opening the petal type for cabinet furniture helps in this.


obuvnicy-malenkie 

Helpful Tips

To calculate the volume and capacity of the pedestal, estimate the estimated number of stored shoes. On the average, one large shelf of the shoe can accommodate up to 9 pairs of different shoes. Three shelves - this is already 27 pairs of shoes, including a nursery. The height of one shelf can be 20-25 cm. If you take into account the length of one pair of shoes of the largest size 28 cm with a width of up to 12 cm and the possibility of storing shoes in an upright position, then the recommended height of the pedestal for this number of pairs will be 70 cm.

24252019

Features of the opening mechanism

The petal opening mechanism - the closing of furniture, especially kitchen cabinets, has long proved itself.The action of furniture petal mechanisms is similar to the work of opening doors in trolley buses and buses. It is based on the principle of rotary-tilt transmission for two parts of plastic plates, between which the shelves are fixed.

scheme +

Shelves, representing a "hamburger" with shoe, act as a kind of petals. Details of the petal mechanism are attached to the front of the box using pins.

ob

The opening system rotates around the conventional horizontal axis at a certain opening angle, providing access to the shelves. The closure of the façade provides a displaced cent of the weight of the petal mechanism.

obuvniz3

For the creation of high galoshnits with the number of shelves more than 3, it is recommended to strengthen the module of the opening mechanism to the wall.

segment

Facade furniture fronts

The hulls of most shoe models, such as those of IKEA or the milana shoe cabinet, are made of chipboard with a thickness of 12-16 mm, with a 1 mm PVC edge, and a facade made of MDF.

For example, the front part of the top panel of the galoshnitsa of four boxes is made of chipboard and ABS plastic. The upper, back and middle straps are also made of particleboard, the legs are covered with acrylic paint.

k-2tumbaobuw milan

The furniture facade of shoes is something that catches our eye immediately. The shoe façade is made and decorated with a light and practical material that does not lose its marketable appearance during operation. Facades galoshnits can be equipped with handles for opening and decorated with panels.

Confirmates and minicamps

If you intend to assemble the walker yourself, then you need to choose the method of binding with the additive. The most common kind of screed elements of the shoe are euroshurfs confirmations and eccentric minifikis.


minifix3

The assembly of the shoe consists of the connection of the elements of the frame: two sidewalls, the bottom and the lid, and the installation of internal shelves with the opening mechanism. Frame frame is preferable to collect using metal corners and confirmations. The Confirmat is an element of a screed with a large area of ​​the threaded surface, ensuring the retention of the material on the peel and cut.

Image 22

For the installation of the screed prepare two holes: one in the plank of the sidewall or the bottom, the other at the end of the part. Building a shoe with the use of a confirmation is simple, you can implement it yourself. It should be borne in mind that the eurosurf hat will be visible from the outside, so the hat is masked with a cap.

tumba_dlya_obuvi16

Helpful Tips

Most galoshnits models are made of inexpensive soft materials, such as chipboard thickness of 10 mm. Euro-screws for chipboard are the best option for fasteners.

How to build a halo in the hallway, shown in the video.

You may be interested in: