Home master. Belt for the tool, which one to choose, tool belt for yourself

The problem of wearing and transporting a hand-held tool, as well as small parts for carrying out plumbing or construction work, has now been completely resolved. To services of the domestic master of a belt and bags for tools, and also vests and bags-carts. At the sight of such a treasure, the eyes scatter. How to choose the right device?

When carrying out locksmith and construction work at height or in cramped conditions of operation, as well as in a limited working space, a tool belt is a reliable assistant.

Any home-based craftsman appreciates this device: carrying out minor repairs or measurements at a height becomes comfortable and safe. It is possible to get the necessary tool from the side pocket of the belt or bag dexterously and quickly. At the same time, the hands of the working master are not at all tense and busy with the main work. Why is the belt or tool bag attractive and how should I choose them?

Screw, belt or tool bag

twist

The first swallow of comfortable and ergonomic storage and carrying of tools was a twist organizer. Organizer twist is a durable fabric, equipped with a large number of different sized pockets for transportation and storage. The size of the organizers for tools is from 560 x 490 mm and allows you to place the necessary minimum set of tools.

Undoubtedly, the convenience of using twist is justified by carrying out any work, including auto mechanic. However twisting is inconvenient to use when working at height, when hands should be directly in working position. Therefore, the appearance of belts and bags of belts for tools was received with enthusiasm by home masters.

belts

Wearing tools on a special belt is justified, in the case of production work, in which undesirable temporary descent-recovery.

This may be electrical work or construction activities, in which it is undesirable to interrupt. The common thing that bags - belts, meant for an electrician, installer or builder, is an improved design that evenly distributes the weight of the tool. Agree that 3-5 kg. tools on the weight should be distributed evenly, eliminating and minimizing excess pressure on the spine and the lumbar region of the worker.

A wide belt cut provides a firm support of the lower back and back. The strict ideality of the design cut eliminates the undesirable possibility of injury to the back area.
Thoughtful design of belts is based on the use of heavy-duty materials, such as hard nylon and genuine leather. The choice of such materials for the manufacture of belts and bags is justified by the properties of the material. The natural leather and industrial nylon practically do not absorb oil or moisture. Therefore, the belt will remain dry even in the rain.

The material is not deformed and does not crumple during use due to the use of a weave of mesh fabric or elastic microfiber as a lining material. In most cases, belts and tool bags have adjustable sizes, which are selected individually. The adjustment of the size is easy and securely fixed with the use of special Velcro, latches and carabiners. Any fastening of lines and belts of a belt or a bag is carried out with the use of steel rivets.

For example, belt stayer  for tools is successfully used for a variety of construction and installation works for comfortable wearing tools, as well as consumables. The belt is made of strong nylon, equipped with solid pockets, reinforced with a double seam. The number of pockets on the belt can reach 10-12 pcs. These are two large pockets, two medium pockets and six small pockets for consumables. A fairly practical belt model for electrician tools!

Improved construction of building and construction kraftool belt for tools can serve for their transfer and storage. The shocking abundance of pockets of 18 pieces pleases with its capacity. It is noteworthy that the pockets and sections of the tool belts are arranged symmetrically, which allows even distribution of the load. The inside of the straps is soft and comfortable, so you will not be able to grate the "working corn". As practice shows the use of the device, the belt must be loaded evenly in front and behind. It is recommended to fold the instrument in such a way: those objects and tools that are leading (pencil, tape measure, knife, screwdriver) must be placed in the right pockets. And the items that are accompanying during the installation or plumbing (nails, screws, ruler) in the left side of the belt.

Thus, it is possible to create priority items for their functioning.
  In addition, the belt is equipped with hammer holders. In a properly selected belt, the locking device is adjusted by one movement, and the fastener operates without jamming.
  To ensure the correct choice of belt or bag for tools, we recommend that you watch the video.

bags

Bags for tools are of no less interest than belts. Compared to the belts, the bags are more spacious, the total number of compartments can be 25. The average geometric dimensions of the bags are 610 x 270 x 400 mm. Therefore, such bags are ideal for long-distance transportation of tools.

Most models of bags are made of dense polyester. For strengthening and rigidity of the construction, a double bottom is used. For convenience of carrying, bags for tools are equipped with shoulder straps, duplicated rubberized overlay. Straps with straps allow you to load or unload the bag from your hand.
  The inner compartments of the bag have a considerable number of pockets of various sizes. The design of pockets of bags in places of intensive daily use is reinforced with steel rivets.

In small pockets, it is more convenient to store the fastener. Long and narrow pockets are suitable for screwdrivers, as well as wrenches. All internal pockets are equipped with Velcro that securely fix the edge of the pocket and ensure the integrity of the contents. Even on the road during transportation, small parts and fasteners do not fall out.

In addition, the bags are equipped with steel carabiners and straps with adjustable length. Separation of bag branches is carried out with the help of zipper fasteners. The number of fasteners can be any, so you can also fasten the bag on the belt of the master. Built-in adjustable carabiners will ensure reliable placement of the bag.

Shopping bags

Before choosing a tool belt and buying, you need to think about its future purpose. Maybe even give preference to a bag-trolley with a telescopic handle? Sturdy and mobile trolleys are equipped with shock-absorbing wheels. Therefore, bag-trolleys are designed for considerable loads when transporting the tool of the home master.