Not a year, a crisis. "Poor" Russian master dreams of such a device, which is able to save money and give heat. Gol on fiction is cunning, we can do everything and induction heating boiler - no problem! Just tell me, what is it?
Content
How the induction boiler works
An induction boiler can be represented as follows: a bundle of pipes, and an inductor is put on them.
Induction heating itself is the contactless heating of electrically conductive materials by means of high frequency currents.
Induction boilers spoiled the reputation of gas and electric in the form of TEN boilers.
Inside the inductor, an electromagnetic field is created that can very quickly heat the core. The core itself is made of steel up to 7 mm.
The core transfers heat to the heat carrier.
The service life of the core is very large, at least 40 years.
Everyone imagines the consequences of prolonged boiling water. What do we see after the operation of an ordinary teapot? And we see scum, and the scum creates heat losses, but we do not need it.
The induction boiler creates microvibration during operation, and this protects 100% of the scale.
What is the benefit of purchasing an induction boiler
If the prices of induction boilers are compared with boilers, the difference is significant, since the induction boiler is more expensive.
But, induction boiler, it is energy-saving equipment, and the service life is huge. TEN, even German, is very reliable, with a constant work quickly burn out.
In addition, as a result of operation, a scaling is formed on the heating element.
At formation even in 0,5 mm, decreases on 10% of a heat transfer and the further - the worse.
For 4 years of operation, the power of the heater is lost almost half.
Extras give an example: the efficiency of the induction boiler and after five years of operation it remains 100%, and the TEN boiler, even the best, loses about 70% of the heat.
Induction boilers do not have heating elements, there are no detachable connections, so you will not get a leak in the system, and the boiler itself will not fail.
Induction Boiler Equipment
For the full operation of the induction boiler, the following equipment is necessary:
-circulation pump;
- Radiators of heating;
-induction heater;
-membrane tank;
-Remote Control;
- support armature.
As a coolant, you can use not only water, but also oil and antifreeze.
From practice, we know that maintenance costs are in a round sum. So, for induction boilers, maintenance is not required. You can install induction boilers in any room and do not need to create special conditions for it. Such boilers operate silently and fireproof.
The efficiency of induction electric boilers is 99%.
To make the installation of the boiler, no special knowledge is required. The induction electric boiler is connected to the heating system without retrofitting the existing system.
The overall dimensions of the boiler are small, it can be installed without much effort in any room.
Such a boiler is able to completely autonomously heat the room and give out hot water.
If you are worried about emergency power failure and freezing of the heating system - as a coolant, use antifreeze or oil.
There are accumulating induction boilers, they have a three-phase primary winding and a short-circuited secondary winding.
Loading ...